ospf:Dom
The per OSPF domain (vrf) information.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adjChangeLogLevel | ospf:AdjChangeLogLevel (scalar:Enum8) |
Adjacency change logging level | SELECTION: 0 - none 1 - brief 2 - detail DEFAULT: none |
| adminSt | nw:AdminSt (scalar:Enum8) |
Holds the administrative state of domain | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| bwRef | ospf:BwRef (scalar:Uint32) |
Bandwidth reference value, holds the range from 1-4000000 if unit is mbps and holds range from 1-4000 if unit is gbps | RANGE: [0, 4294967295] DEFAULT: 40000 |
| bwRefUnit | ospf:BwRefUnit (scalar:Enum8) |
Bandwidth reference unit (Mbps or Gbps) | SELECTION: 0 - mbps 1 - gbps DEFAULT: mbps |
| capVrfLite | ospf:VrfLiteControl (scalar:Enum8) |
Capability vrf-lite for L3VPN or Ethernet VPN | SELECTION: 0 - unspecified 1 - l3vpn 2 - evpn DEFAULT: unspecified |
| ctrl | ospf:DomControl (scalar:Bitmask8) |
Holds the controls bfd, name-lookup, default-passive and Segment Routing | SELECTION: 0 - unspecified 1 - bfd 2 - name-lookup 4 - default-passive 8 - segrt DEFAULT: unspecified |
| defMetric | ospf:Metric (scalar:Uint32) |
Default metric cost for redistributed routes | RANGE: [0 , 16777214] DEFAULT: unspecified |
| defRtNssaPbitClear | scalar:Bool |
Override RFC 3101 behaviour and add default route on ABR even if P-bit is clear in received type-7 default route LSA | SELECTION: true or false |
| discardRoute | ospf:DiscardRoute (scalar:Bitmask8) |
Control bits for discard-route external and internal | SELECTION: 0 - unspecified 1 - int 2 - ext DEFAULT: int,ext |
| dist | ospf:Dist (scalar:UByte) |
Administrative distance preference | RANGE: [1 , 255] DEFAULT: 110 |
| downbitIgnore | scalar:Bool |
Holds the status of Down-bit ignore | SELECTION: true or false |
| maxEcmp | ospf:Ecmp (scalar:UByte) |
Maximum Equal Cost Multi Path(ECMP) | RANGE: [1 , 64] DEFAULT: 8 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| rfc1583Compat | scalar:Bool |
RFC 1583 compatibility for external path preferences | SELECTION: true or false |
| rfc1583CompatIos | scalar:Bool |
RFC 1583 compatibility to IOS for external path preferences | SELECTION: true or false |
| rtrId | ip:RtrId (address:IPv4) |
Router identifier for this domain | Value must match ipv4 format |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| operRtrId | ip:RtrId (address:IPv4) |
Operational router identifier for this domain | Value must match ipv4 format |
| operSrgbEnd | ulib:LabelVal (scalar:Uint32) |
Operational Segment Routing Global Block(SRGB) end index for OSPF | RANGE: [0 , 471804] |
| operSrgbStart | ulib:LabelVal (scalar:Uint32) |
Operational Segment Routing Global Block(SRGB) start index for OSPF | RANGE: [0 , 471804] |
| operSt | ospf:OperSt (scalar:Enum8) |
Operational state of Layer 3 virtualization related commands(l3vm) | SELECTION: 0 - invalid 1 - down 2 - up DEFAULT: down |
| operStSgmntRtgMpls | ospf:SgmntRtgMplsOperSt (scalar:Enum8) |
Operational state of Segment Routing MPLS in OSPF VRF which is Enable/Disable | SELECTION: 0 - Disabled 1 - Enabled DEFAULT: Disabled |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |